Mr. Nitish Kumar Singh

1. N Patidar, A Makrariya , A.M. Alsayah , N K Singh , M J. Alshukri , M. R H Rasheed, R k Rathore “Model to identify comfortable cloth fabric for human body during thermal stress due to physical exercise” Material research express (SCIE, IF =2.3) In press
2. K. Singh, S. Balaguru, P. Mehata, A Kaimkuriya, A. K. Namdeo and R K Deb “Effect of Reinforcement On Micro Structural and Compressive Deformation Behavior on Closed Cell AA7075 Aluminium Foam,” jmmf, Feb. 2024 72(2): 0-0; 2024. https.//doi.org/10.18311/jmmf/2024/35988 (Scopus).
3. K. Singh, S. Balaguru, R. K. Rathore, A. K. Namdeo, and A. Kaimkuriya, “Multi-Criteria Decision-Making Technique for Optimal Material Selection of AA7075/SiC Composite Foam using COPRAS Technique”, jmmf, Nov. 2023 https://doi.org/10.18311/jmmf/2023/34005 (Scopus).
4. K. Singh and S. Balaguru, “Fabrication and Mechanical Characterization of Al ‑ Zn ‑ Cu Alloy / SiC / TiB 2 Hybrid Reinforced Metal Matrix Composite using Top Loaded Bottom Pouring Stir Casting Method,” Silicon, no. 0123456789, 2023, doi: https://doi.org/10.1007/s12633-023-02648-4 (SCIE, IF = 3.4).
5. K. Singh and B. Sethuraman, “Development and characterization of Aluminium AA7075 hybrid composite foams (AHCFs) using SiC and TiB₂ reinforcement,” Int. J. Met.,2023, https://doi.org/10.1007/s40962-023-01009-6 SCIE, I.F = 2.6
6. K. Rathore, M. Awasthy, R. Himte, A. K. Shukla, N. Kanoje, and N. K. Singh, “Response Surface Optimized Robotic Spray- Painting Metamodeling for Fanuc Paint,” Advances and Applications in Mathematical Sciences, Volume 21, Issue 9, July 2022, Pages 5163-5171 © 2022 Mili Publications, India. https://www.mililink.com/upload/article/2021782243aams_vol_219_july_2022_a28_p51635171_ram_krishna_et_al..pdf (ESCI).
7. K. Rathore, N. K. Singh, A. K. Sinha, K. Panthi, and A. K. Sharma, “Mechanical properties of lightweight aluminium hybrid composite foams (AHCFs ) for structural applications,” Adv. Mater. Process. Technol., vol. 8, no. 4, pp. 4194–4208, 2022, doi: https://doi.org/10.1080/2374068X.2022.2048498 (ESCI, IF = 2.2).
8. K. Singh and S. K. Pradhan, “Experimental and numerical investigations of pipe orbital welding process,” Mater. Today Proc., vol. 27, pp. 2964–2969, 2020, https://doi.org/10.1016/j.matpr.2020.04.902 (Scopus).

9. K. Singh and S. Balaguru “Experimental Analysis of Foaming Agent Contents in AA7075/SiC Closed Cell Aluminum Composite Foam” In: Sethuraman, B., Jain, P., Gupta, M. (eds) Recent Advances in Mechanical Engineering. STAAAR 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-2349-6_51. (Scopus)

10. K. Rathore, P. Patel, N. K. Singh, A. Kaimkuriya, R. H. Gajghat, M. A. Kumbhalkar, and K. Verma , “EES analysis of low-grade thermal energy organic-rankine-vapor compression-refrigeration system”. AIP Conf Proc 2839:20031. https://doi.org/10.1063/5.0167642. (Scopus)
11. K. Malviya, V. Somkunwar, M. K. Pradhan, R. K. Rathore, and N. K. Singh, “A Review on Aluminum Metal Matrix Composites: Processing and Properties,” AAP Research Notes on Optimization and Decision Making Theories, processing Computational Optimization, Modeling, and Simulation for Engineering Applications, Apple Academic press, https://www.appleacademicpress.com/computational-optimization-modeling-and-simulation-for-engineering-applications-/9781774916001. (Scopus)
12. K. Rathore, N. K. Singh, and J. F. Xavier, “Characterization of AA7075 Alloy Foam Using Calcium and Magnesium Carbonate as Foaming Agent” BT – Processing and Characterization of Materials: Select Proceedings of CPCM 2020. In: Pal S, Roy D, Sinha SK (eds). Springer Singapore, Singapore, pp 289–297. https://doi.org/10.1007/978-981-16-3937-1_30. (Scopus).
13. K. Singh, M. K. Malviya, V. Chandelkar, S. Pathak, and A Khan, “Numerical Investigation of TIG welding Process using Finite Element Method,” Int. J. Res. Appl. Sci. Eng. Technol., vol. 7, no. 1, pp. 733–738, 2019, doi: 10.22214/ijraset.2019.1114.
14. K. Singh, “Study of Mechanical Property of Sintered Iron Preform,” Int. J. Res. Appl. Sci. Eng. Technol., vol. 6, no. 2, pp. 351–354, 2018, doi: 10.22214/ijraset.2018.2050.

1. Paper titled “Experimental and numerical investigation of AA7075/SiC/TiB2 hybrid aluminium foam using finite element method” presented in 9^th International conference “Shaastrath-2024” on computational optimization, Modelling and simulation: Recant Trands and Challenges held at RCET Bhilai, India, 5^th – 6^th January 2024.
2. Paper titled “Effect of Relative density on Tensile and Compressive Behavior of Closed Cell AA7075/SiC/TiB₂ Aluminium Foam” presented in 2^nd International Conference on Sustainable Technologies & Advances in Automation, Aerospace & Robotics- STAAAR 2023 held at VIT Bhopal, India, 15^th-16^th December 2023.
3. Paper titled “Innovation and tribological parametric management of journal bearings used in high-speed applications” presented in International Conference on LeadershipX: IILC Ignite: Empowering Innovation and Leadership for Thriving Start-ups held at Lingayas’s Vidyapeeth, Faridabad, Haryana, India, 3^rd-4^th November 2023.
4. Paper titled “Multiobjective optimization of process parameter subjected to End milling process of novel hybrid AA7075/SiC/TiB₂ composite through TOPSIS method” presented in International Conference on LeadershipX: IILC Ignite: Empowering Innovation and Leadership for Thriving Start-ups held at Lingayas’s Vidyapeeth, Faridabad, Haryana, India, 3^rd-4^th November 2023.
5. Paper titled “Multiobjective optimization of process parameter subjected to End milling process of AA7075 alloy through TOPSIS method” presented in International Conference on Smart and Innovative Development in Science, Engineering & Technology held at BIT, Durg, India, 16-18^th August 2023.
6. Paper titled “Effect of Foaming Agent Weight Percentage on the Microstructural and Compressive Deformation Characteristics of AA7075/SiC Closed Cell Aluminum Composite Foam” presented in 1^st International Conference on Sustainable Technologies & Advances in Automation, Aerospace & Robotics- STAAAR 2022 held at VIT Bhopal, India, 16^th-17^th December 2022.
7. Paper titled “Effect of Reinforcement on Micro structural and Compressive Deformation Behavior on Closed Cell AA7075 Aluminium Foam” presented in International Conference on Sustainable Materials, Manufacturing & Industrial Engineering- ICSMMIE-2022 held at SIT Tumakuru, India, 1^st and 2^nd July 2022.
8. Paper titled “EES Analysis of Low-Grade Thermal Energy Organic-Rankine Vapor Compression-Refrigeration System” presented in International conference on innovations in Science, Hybrid Materials IC-ISHVA 2022, India, 16^th and 17^th July 2022.
9. Paper titled “Response Surface Optimized Robotic Spray-Painting Metamodeling for Fanuc Paint Robot P-250iB/15” presented in 7^th International conference “Shaastrath-2022” on computational optimization, Modelling and simulation: Recant Trands and Challenges held at RCET Bhilai, India, 25 and 26^th March 2022
10. Paper titled “A Review on Aluminium Metal Matrix Composites: Processing and Properties” presented in 7^th International conference “Shaastrath-2022” on computational optimization, Modelling and simulation: Recant Trands and Challenges held at RCET Bhilai, India, 25 and 26^th March 2022
11. Paper titled “Characterization of AA7075 Alloy Foam Using Calcium and Magnesium Carbonate as Foaming Agent” presented in Conference on Processing and Characterization of Materials (CPCM 2020) held at NIT Rourkela, India, 18^th–20^th December 2020.
12. Paper titled “Aluminium Metal Foam: A Review” presented in International E-Conference on Sustainable Development in Mechanical Engineering (SDME 2020) held at VNRG Institute of Technology, Hyderabad, India, 30^th and 31^st October 2020.
13. Paper titled “Experimental and Numerical Investigation of Pipe orbital welding process” presented in International Conference on Materials and Manufacturing Methods 2019 held at NIT, Tiruchirappalli, India, 27^th and 28^th December 2019.

1. Design of Front bumper for an automobile (using the combination of aluminium Hybrid composite as face sheet and aluminium Hybrid composite foams (AA7075/SiC) as core material), (Design number 356100-001, Journal No is 10/2022, Journal Date 1/03/2022, Design patent office Kolkata, India.
2. Smart car bumper system predicting accidents and controlling the braking mechanism using machine learning application number 202221062428, Under Publication.
3. Design of Nested Star-Shaped Plasmonic Metamaterial Absorber, Submitted Design patent office Kolkata, India, Application Number- 407730-001, granted 16/022024.

Funded project handled  

1. Completed 2,00,000 INR seed money grant funded by VIT University under Support for Excellence in Academic Research (SPEAR) grant number SMG-01 as co-principal investigator “Design and development of Automobile front bumper by stir casting method using AA7075/SiC/TiB₂” project number SMG-01.
2. Completed 3,00,000 INR Collaborative Research project funded by National Project Implementation Unit (NPIU), CSVTU (State Technical University of Chhattisgarh and TEQIP-III as principal investigator “Manufacturing and Characterization of AA7075 alloy foam using calcium and magnesium carbonate as foaming agent” project number CSVTU/TEQIP-III/15.